topic Re: Configuring Secondary ACS Server in Network Access Control https://community.cisco.com/t5/network-access-control/configuring-secondary-acs-server/m-p/624773#M421819 <HTML><HEAD></HEAD><BODY><P>Hi, </P><P></P><P>just add another TACACS+ server below the first one. The router will always communicate with the first listed TACACS+ server in the list, as soon as the first one fails the router will try reaching the second TACACS+ server listed below. </P><P></P><P>the command for mentioning second TACACS+ server is same as you have mentioned above.</P><P></P><P></P><P>thanks,</P><P>gagan</P></BODY></HTML> Fri, 02 Feb 2007 09:52:32 GMT gagansethi 2007-02-02T09:52:32Z Configuring Secondary ACS Server https://community.cisco.com/t5/network-access-control/configuring-secondary-acs-server/m-p/624772#M421818 <P>i am prepared to configure ACS Replication between my two SecureACS Servers vs 3.2. My question is, how am i supposed to configure both TACACS Servers in the configuration of let's say a router if the primary fails? As far as i know the IOS will accept only one "tacacs-server host 172.x.x.x" command.</P> Sun, 10 Mar 2019 21:57:45 GMT https://community.cisco.com/t5/network-access-control/configuring-secondary-acs-server/m-p/624772#M421818 ppierre 2019-03-10T21:57:45Z Re: Configuring Secondary ACS Server https://community.cisco.com/t5/network-access-control/configuring-secondary-acs-server/m-p/624773#M421819 <HTML><HEAD></HEAD><BODY><P>Hi, </P><P></P><P>just add another TACACS+ server below the first one. The router will always communicate with the first listed TACACS+ server in the list, as soon as the first one fails the router will try reaching the second TACACS+ server listed below. </P><P></P><P>the command for mentioning second TACACS+ server is same as you have mentioned above.</P><P></P><P></P><P>thanks,</P><P>gagan</P></BODY></HTML> Fri, 02 Feb 2007 09:52:32 GMT https://community.cisco.com/t5/network-access-control/configuring-secondary-acs-server/m-p/624773#M421819 gagansethi 2007-02-02T09:52:32Z