topic Re: Setting UDFs with RDBMS in Network Access Control

Setting UDFs with RDBMS

RaderZer0 — Sun, 10 Mar 2019 21:56:30 GMT

I am working off of an ACS Solution Engine and I have been trying to add users and update information using RDBMS. I have been able to successfully add users and give them passwords and even groups, but I can not figure out how to update information in the User Defined Fields. Can someone take a look at the test attachment I have and tell me what I am doing wrong? Thanks in advance.

Re: Setting UDFs with RDBMS

Vivek Santuka — Thu, 25 Jan 2007 16:03:59 GMT

Hi,

For Action code 1 and 2 trying using "USER_

DEFINED_FIELD_0" in ValueName instead of "Real Name"

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/ag.htm#wp90708

Regards,

Vivek

Re: Setting UDFs with RDBMS

RaderZer0 — Thu, 25 Jan 2007 16:39:23 GMT

Hey,

Thank you for the advise, I tried that before and it didn't work, but I figured it out this morning. I had the same Sequence ID for all lines and it was only processing the first one. Once I changed that and used the "USER_DEFINED_FIELD_0" it worked. Thanks for your Help.

Michael