topic Re: CSACSE-1113-K9 login problems in Network Access Control https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682027#M422142 <HTML><HEAD></HEAD><BODY><P>That did it, i was using the old 9600 baud setting (i've used that for all of my cisco devices). This was one of the things i should have paid more attention to from the start.</P><P></P><P>thanks again!</P></BODY></HTML> Thu, 11 Jan 2007 05:28:02 GMT echelon360 2007-01-11T05:28:02Z CSACSE-1113-K9 login problems https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682025#M422140 <P>Just purchased the above mentioned and i can't get into the appliance.</P><P></P><P>-Upon successful boot-up,i'm prompted with the "lock notice" capture asking me to either connect via serial or web.</P><P></P><P>-I've tried to console in the appliance using the provided serial cable but i just can't seem to get anything.It's just a blank screen.</P><P></P><P>Can someone pls pt me in the right direction?</P><P></P><P>Thanks!</P> Sun, 10 Mar 2019 21:54:19 GMT https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682025#M422140 echelon360 2019-03-10T21:54:19Z Re: CSACSE-1113-K9 login problems https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682026#M422141 <HTML><HEAD></HEAD><BODY><P>Can you check the settings for the terminal software connected to the console.</P><P></P><P>The settings are :</P><P>.Baud = 115200 </P><P>.Databits = 8 </P><P>.Parity = N </P><P>.Stops = 1 </P><P>.Flow control = None </P><P></P></BODY></HTML> Sat, 06 Jan 2007 21:47:20 GMT https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682026#M422141 somishra 2007-01-06T21:47:20Z Re: CSACSE-1113-K9 login problems https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682027#M422142 <HTML><HEAD></HEAD><BODY><P>That did it, i was using the old 9600 baud setting (i've used that for all of my cisco devices). This was one of the things i should have paid more attention to from the start.</P><P></P><P>thanks again!</P></BODY></HTML> Thu, 11 Jan 2007 05:28:02 GMT https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682027#M422142 echelon360 2007-01-11T05:28:02Z Re: CSACSE-1113-K9 login problems https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682028#M422143 <HTML><HEAD></HEAD><BODY><P>cool...</P><P>rate me if it helped <span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span></P></BODY></HTML> Thu, 11 Jan 2007 16:37:00 GMT https://community.cisco.com/t5/network-access-control/csacse-1113-k9-login-problems/m-p/682028#M422143 somishra 2007-01-11T16:37:00Z