topic CSACS SE 4.0.1 in Network Access Control https://community.cisco.com/t5/network-access-control/csacs-se-4-0-1/m-p/634860#M422603 <P>Have a customer that has the 1113 hardened ACS, configured with brand new 4.0 code. Trying to authenticat Cisco AP's through WLSM module to ACS Server. AP's show as registered in WLSM, but failed in ACS. Checked everything from username/passwords, IP Addresses, config in WLSM, ACS, etc. Anyone know of any issues with the new code or the hardened ACS?</P> Sun, 10 Mar 2019 21:48:22 GMT c.grzybowski 2019-03-10T21:48:22Z CSACS SE 4.0.1 https://community.cisco.com/t5/network-access-control/csacs-se-4-0-1/m-p/634860#M422603 <P>Have a customer that has the 1113 hardened ACS, configured with brand new 4.0 code. Trying to authenticat Cisco AP's through WLSM module to ACS Server. AP's show as registered in WLSM, but failed in ACS. Checked everything from username/passwords, IP Addresses, config in WLSM, ACS, etc. Anyone know of any issues with the new code or the hardened ACS?</P> Sun, 10 Mar 2019 21:48:22 GMT https://community.cisco.com/t5/network-access-control/csacs-se-4-0-1/m-p/634860#M422603 c.grzybowski 2019-03-10T21:48:22Z Re: CSACS SE 4.0.1 https://community.cisco.com/t5/network-access-control/csacs-se-4-0-1/m-p/634861#M422605 <HTML><HEAD></HEAD><BODY><P>What failure code are you getting in ACS? That will help a lot. </P><P></P><P></P><P>-Eric</P><P></P><P>Please remember to rate all helpful posts.</P><P></P><P></P></BODY></HTML> Fri, 20 Oct 2006 15:04:32 GMT https://community.cisco.com/t5/network-access-control/csacs-se-4-0-1/m-p/634861#M422605 ethiel 2006-10-20T15:04:32Z