topic How to implement AV pairs? in Network Access Control https://community.cisco.com/t5/network-access-control/how-to-implement-av-pairs/m-p/659736#M422768 <P>We?re running Cisco Secure ACS for network device authentication, authorization, and accounting in a multivendor environment. As you can probably suspect we?re have issues with the non-Cisco devices. The devices in question are a Marconi BXR-5000 multiservice router and Juniper M320 router. Device TACACS+ configuration is fairly simple; the ACS configuration is the problem. The devices require AV pairs to be configured on ACS. The configuration given from the vendors looks like UNIX configuration and is below?</P><P></P><P>user=rob</P><P>?.</P><P>service = junos-exec {</P><P> local-user-name = &lt;local template configured on router&gt;</P><P>}</P><P></P><P>Using the web interface how do I configure the above configuration?</P><P></P><P>TIA,</P><P>Ryan</P><P></P> Sun, 10 Mar 2019 21:46:43 GMT dnewell24 2019-03-10T21:46:43Z How to implement AV pairs? https://community.cisco.com/t5/network-access-control/how-to-implement-av-pairs/m-p/659736#M422768 <P>We?re running Cisco Secure ACS for network device authentication, authorization, and accounting in a multivendor environment. As you can probably suspect we?re have issues with the non-Cisco devices. The devices in question are a Marconi BXR-5000 multiservice router and Juniper M320 router. Device TACACS+ configuration is fairly simple; the ACS configuration is the problem. The devices require AV pairs to be configured on ACS. The configuration given from the vendors looks like UNIX configuration and is below?</P><P></P><P>user=rob</P><P>?.</P><P>service = junos-exec {</P><P> local-user-name = &lt;local template configured on router&gt;</P><P>}</P><P></P><P>Using the web interface how do I configure the above configuration?</P><P></P><P>TIA,</P><P>Ryan</P><P></P> Sun, 10 Mar 2019 21:46:43 GMT https://community.cisco.com/t5/network-access-control/how-to-implement-av-pairs/m-p/659736#M422768 dnewell24 2019-03-10T21:46:43Z Re: How to implement AV pairs? https://community.cisco.com/t5/network-access-control/how-to-implement-av-pairs/m-p/659737#M422769 <HTML><HEAD></HEAD><BODY><P>The short answer is you cant, but we can!</P><P></P><P><A class="jive-link-custom" href="http://www.extraxi.com/contact.htm" target="_blank">www.extraxi.com/contact.htm</A></P></BODY></HTML> Mon, 09 Oct 2006 13:14:02 GMT https://community.cisco.com/t5/network-access-control/how-to-implement-av-pairs/m-p/659737#M422769 darpotter 2006-10-09T13:14:02Z