topic Re: ACS 3.3.2 User authentication in Network Access Control

ACS 3.3.2 User authentication

prossouw — Sun, 10 Mar 2019 21:43:19 GMT

The auditors want me to limit the Network Management userid to be able to login only from the Management Station IP. Can this be done, preferably without changing configs on the network devices.

Re: ACS 3.3.2 User authentication

amritpatek — Mon, 28 Aug 2006 13:12:02 GMT

we could configure Source IP Address access to a restricted number of trusted workstations.This can be configured in the Administration Control area under Access Policy Setup.Refer the following URL for more info

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a00800887d8.shtml#wp38949

Re: ACS 3.3.2 User authentication

prossouw — Mon, 28 Aug 2006 15:10:09 GMT

Not quite what I was looking for. The Management Staion userid is used to logon to routers and switches. The auditors want this logon ability restricted to the management station, i.e. I cannot use this userid from my notebook, diffrent subnet.