topic Re: SBR for RADIUS Authentication in Network Access Control https://community.cisco.com/t5/network-access-control/sbr-for-radius-authentication/m-p/602977#M427060 <HTML><HEAD></HEAD><BODY><P>"enable password" authorization is not supported in RADIUS authorization. TACACS+ supports it.</P></BODY></HTML> Wed, 14 Jun 2006 12:26:41 GMT carenas123 2006-06-14T12:26:41Z SBR for RADIUS Authentication https://community.cisco.com/t5/network-access-control/sbr-for-radius-authentication/m-p/602976#M427054 <P>Hi Everyone,</P><P></P><P>Does anybody know if Steel Belt Radius would be able to authenticate both the telnet and enable passwords for RADIUS authentication?</P><P></P><P>I have tried IAS, but apparently IAS does not have any understanding of the enable password and therefore returns an error.</P><P></P><P>Any help would be great.</P><P></P><P>Thanks,</P><P></P><P>Dan</P> Sun, 10 Mar 2019 21:37:29 GMT https://community.cisco.com/t5/network-access-control/sbr-for-radius-authentication/m-p/602976#M427054 daniel.bowen 2019-03-10T21:37:29Z Re: SBR for RADIUS Authentication https://community.cisco.com/t5/network-access-control/sbr-for-radius-authentication/m-p/602977#M427060 <HTML><HEAD></HEAD><BODY><P>"enable password" authorization is not supported in RADIUS authorization. TACACS+ supports it.</P></BODY></HTML> Wed, 14 Jun 2006 12:26:41 GMT https://community.cisco.com/t5/network-access-control/sbr-for-radius-authentication/m-p/602977#M427060 carenas123 2006-06-14T12:26:41Z