topic Re: ACS 4.0, only 1 Shell Command auth. set possible in Network Access Control https://community.cisco.com/t5/network-access-control/acs-4-0-only-1-shell-command-auth-set-possible/m-p/486637#M427997 <HTML><HEAD></HEAD><BODY><P>Problem resolved by renaming authorization sets and reloading ACS......</P><P></P><P>thx Sander</P></BODY></HTML> Fri, 30 Dec 2005 09:19:10 GMT spennaertz 2005-12-30T09:19:10Z ACS 4.0, only 1 Shell Command auth. set possible https://community.cisco.com/t5/network-access-control/acs-4-0-only-1-shell-command-auth-set-possible/m-p/486636#M427994 <P>Hi all, </P><P></P><P>I am wondering if this is a "hidden feature" of the evaluation software or a bug... </P><P></P><P>I am currently running Cisco Acs server v.4.0 (evaluatie version) Win2k3 platform; with authentication, authorization and accouting. </P><P></P><P>In a nutshell I have the following setup:</P><P>- group1 uses: Shell Command Authorization Set1</P><P>- group2 uses: Shell Command Authorization Set2</P><P></P><P>Problem: Users in group2 are somehow authorized against the commands listed in Shell Auth. Comm. set1 instead of the configured Shell Auth. Comm. set2</P><P></P><P>Is it possible that with the evaluation software only one Shell Command Authorization Set is allowed to be active? Does anyone know?</P><P></P><P>Many thx</P><P>Sander</P> Sun, 10 Mar 2019 21:24:52 GMT https://community.cisco.com/t5/network-access-control/acs-4-0-only-1-shell-command-auth-set-possible/m-p/486636#M427994 spennaertz 2019-03-10T21:24:52Z Re: ACS 4.0, only 1 Shell Command auth. set possible https://community.cisco.com/t5/network-access-control/acs-4-0-only-1-shell-command-auth-set-possible/m-p/486637#M427997 <HTML><HEAD></HEAD><BODY><P>Problem resolved by renaming authorization sets and reloading ACS......</P><P></P><P>thx Sander</P></BODY></HTML> Fri, 30 Dec 2005 09:19:10 GMT https://community.cisco.com/t5/network-access-control/acs-4-0-only-1-shell-command-auth-set-possible/m-p/486637#M427997 spennaertz 2005-12-30T09:19:10Z