topic Active Directory integration in Network Access Control https://community.cisco.com/t5/network-access-control/active-directory-integration/m-p/469996#M428126 <P>I know Check Point firewalls can integrate with Active Directory to perform authentication. Can we do the same with Cisco Firewalls? with the ISR?</P> Sun, 10 Mar 2019 21:23:20 GMT CarlosEduardo 2019-03-10T21:23:20Z Active Directory integration https://community.cisco.com/t5/network-access-control/active-directory-integration/m-p/469996#M428126 <P>I know Check Point firewalls can integrate with Active Directory to perform authentication. Can we do the same with Cisco Firewalls? with the ISR?</P> Sun, 10 Mar 2019 21:23:20 GMT https://community.cisco.com/t5/network-access-control/active-directory-integration/m-p/469996#M428126 CarlosEduardo 2019-03-10T21:23:20Z Re: Active Directory integration https://community.cisco.com/t5/network-access-control/active-directory-integration/m-p/469997#M428129 <HTML><HEAD></HEAD><BODY><P>Cisco devices can be authenticated using Active Directory. But this authentication happens via ACS.</P><P>You need to have a ACS in your network, further this ACS database is integrated with windows Active Directory. So when you login as a user to the Cisco device the authentication request is send to the ACS by radius/tacacs protocol suite, checked in its own database, if this is integrated with AD then the request is forwarded to the AD user databse...</P><P></P></BODY></HTML> Fri, 25 Nov 2005 09:53:32 GMT https://community.cisco.com/t5/network-access-control/active-directory-integration/m-p/469997#M428129 rush2amol 2005-11-25T09:53:32Z