topic Re: Linux RADIUS authentication via ACS in Network Access Control https://community.cisco.com/t5/network-access-control/linux-radius-authentication-via-acs/m-p/455664#M428155 <HTML><HEAD></HEAD><BODY><P>I got it to work. I had to uncheck the "Per Group Defined Network Access Restrictions" under Network Access Restrictions in the groups setup. I don't know why this is necesary though. For this group, all of the network groups were accessible on any port from any IP.</P></BODY></HTML> Tue, 22 Nov 2005 18:54:03 GMT meromick 2005-11-22T18:54:03Z Linux RADIUS authentication via ACS https://community.cisco.com/t5/network-access-control/linux-radius-authentication-via-acs/m-p/455663#M428153 <P>I am trying to authenticate my linux users thru RADIUS via Secure ACS 3.3. Local login to linux works fine, but when a user trys to connect via SSH or Telnet, the login fails. The failed attempts log shows "User Access Filtered", the RDS.log shows "User may not connect with present CLI". Any ideas?</P> Sun, 10 Mar 2019 21:22:59 GMT https://community.cisco.com/t5/network-access-control/linux-radius-authentication-via-acs/m-p/455663#M428153 meromick 2019-03-10T21:22:59Z Re: Linux RADIUS authentication via ACS https://community.cisco.com/t5/network-access-control/linux-radius-authentication-via-acs/m-p/455664#M428155 <HTML><HEAD></HEAD><BODY><P>I got it to work. I had to uncheck the "Per Group Defined Network Access Restrictions" under Network Access Restrictions in the groups setup. I don't know why this is necesary though. For this group, all of the network groups were accessible on any port from any IP.</P></BODY></HTML> Tue, 22 Nov 2005 18:54:03 GMT https://community.cisco.com/t5/network-access-control/linux-radius-authentication-via-acs/m-p/455664#M428155 meromick 2005-11-22T18:54:03Z