topic RDBMS Synchronization Options in Network Access Control https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424228#M428194 <P>I use Cisco ACS 3.3 version. When i want to configure RDBMS Synchronization i can't see the table "FTP Setup Options". I needed this table to configure FTP with the purpose of adding some user options. </P><P></P><P>Somebody knows the solution for this problem ? </P> Sun, 10 Mar 2019 21:22:25 GMT k.rouwette 2019-03-10T21:22:25Z RDBMS Synchronization Options https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424228#M428194 <P>I use Cisco ACS 3.3 version. When i want to configure RDBMS Synchronization i can't see the table "FTP Setup Options". I needed this table to configure FTP with the purpose of adding some user options. </P><P></P><P>Somebody knows the solution for this problem ? </P> Sun, 10 Mar 2019 21:22:25 GMT https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424228#M428194 k.rouwette 2019-03-10T21:22:25Z Re: RDBMS Synchronization Options https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424229#M428198 <HTML><HEAD></HEAD><BODY><P>Software or appliance?</P><P></P><P>The ftp upload of csv files is only supported on the appliance.</P></BODY></HTML> Tue, 15 Nov 2005 09:51:25 GMT https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424229#M428198 darpotter 2005-11-15T09:51:25Z Re: RDBMS Synchronization Options https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424230#M428201 <HTML><HEAD></HEAD><BODY><P>I have the software version and not the appliance. Now i have to look for an another option. </P><P></P><P>Thanks for your Help</P></BODY></HTML> Tue, 15 Nov 2005 10:05:31 GMT https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424230#M428201 k.rouwette 2005-11-15T10:05:31Z Re: RDBMS Synchronization Options https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424231#M428202 <HTML><HEAD></HEAD><BODY><P>Although not strictly supported you can make the software image run like the appliance</P><P></P><P>csutil -setPlatform appliance</P><P></P><P>This will then enable the appliance features</P><P></P></BODY></HTML> Wed, 16 Nov 2005 23:08:14 GMT https://community.cisco.com/t5/network-access-control/rdbms-synchronization-options/m-p/424231#M428202 andrewclymer 2005-11-16T23:08:14Z