topic Re: specify pool name in radius reply in Network Access Control https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405482#M428340 <HTML><HEAD></HEAD><BODY><P>I guess this sould be possible using the "vendor-specific" attributes in RADIUS on Cisco ACS. Can anyone show the steps to configure this?</P></BODY></HTML> Wed, 19 Oct 2005 20:17:03 GMT ebreniz 2005-10-19T20:17:03Z specify pool name in radius reply https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405481#M428336 <P>hello all . I have 2 pools of IPs on the router ans have dialup vdpn sessions on it , I need some specific users get from a pool and other users from the other pool. Can I return the pool name in the radius reply when the user is authenticating ? and how ?</P> Sun, 10 Mar 2019 21:20:31 GMT https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405481#M428336 tamer 2019-03-10T21:20:31Z Re: specify pool name in radius reply https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405482#M428340 <HTML><HEAD></HEAD><BODY><P>I guess this sould be possible using the "vendor-specific" attributes in RADIUS on Cisco ACS. Can anyone show the steps to configure this?</P></BODY></HTML> Wed, 19 Oct 2005 20:17:03 GMT https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405482#M428340 ebreniz 2005-10-19T20:17:03Z Re: specify pool name in radius reply https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405483#M428346 <HTML><HEAD></HEAD><BODY><P>If you look in the group/user setup page of ACS you'll see a section "IP Assignment"</P><P></P><P>For each group of users, just select the "Assigned from AAA Client pool" and enter the pool name.</P><P></P><P>When users authenticate, ACS will send the pool name back to the device.</P><P></P><P>This is protocol independant and to some extent RADIUS vendor independant too in that it knows about IETF, Cisco and Ascend assignment methods.</P></BODY></HTML> Thu, 03 Nov 2005 12:40:36 GMT https://community.cisco.com/t5/network-access-control/specify-pool-name-in-radius-reply/m-p/405483#M428346 darpotter 2005-11-03T12:40:36Z