topic send IP range in Network Access Control

send IP range

shefiksah — Sun, 10 Mar 2019 21:18:41 GMT

Hi...

i have Cisco 3640 Router and i am using freeRadius with MySQL to send static IP address to my customers. I dont have any problem to give static IP address to customer.

Framed-IP-Address', 'A.B.C.20

Framed-IP-Netmask', '255.255.255.0

I would like to give IP range (eg. 3 bits 6 IP address) as well to customer so the customer can use these IP addresses.

Anyone can help me

Thanks

Re: send IP range

igorj — Fri, 23 Sep 2005 10:29:52 GMT

Framed-IP-Netmask has influence only on NAS side and

it'll insert the correct route into the routing table

(see the enclosed part), but it'll have NO effect

on the client side - meaning that the end-user should

do all addressing by himself.

Routing table for PPP user with one /28 subnet:

U 192.168.1.128/28 [1/0] via 192.168.100.129

C 192.168.1.129/32 is directly connected, Virtual-Access35

/Igor