topic Re: Download acl doesn´t work in Network Access Control https://community.cisco.com/t5/network-access-control/download-acl-doesn-t-work/m-p/440414#M428887 <HTML><HEAD></HEAD><BODY><P>I think they are supported, for more information refer</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801a6b34.html#1072494" target="_blank">http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801a6b34.html#1072494</A></P></BODY></HTML> Tue, 12 Jul 2005 15:40:05 GMT smalkeric 2005-07-12T15:40:05Z Download acl doesn´t work https://community.cisco.com/t5/network-access-control/download-acl-doesn-t-work/m-p/440413#M428886 <P>I have configured download acl in a Acs 3.2 for apply it in the 3750 with 802.1x at the ports. The authentication 802.1x is working fine but I am not getting downloadable acl from the acs.</P><P>I am getting the next debugs:</P><P>Received QUEUE EVENT in response to AAA Request</P><P>Dot1x matching request-response id 39 found</P><P>Length of recv eap packet from radius = 4</P><P>dot1x-ev:Received VLAN Id 31</P><P>dot1x_bend Gi1/0/3: during state dot1x_bend_response, got event 3(afail)</P><P>dot1x_bend Gi1/0/3: dot1x_bend_response -&gt; dot1x_bend_fail</P><P>Dot1x Failure State Entered</P><P>dot1x-ev:dot1x_bend_fail_enter:0008.0d96.e5d8: Current ID=27</P><P></P><P>dot1x-ev:dot1x_bend: Sending Radius Response to Supplicant of length 4</P><P>dot1x-ev:Transmitting an EAPOL frame on GigabitEthernet1/0/3</P><P>dot1x-packet:Tx EAP-Failure, id 27, ver 1, len 4 (Gi1/0/3)</P><P> Do you have any idea ?</P><P></P> Sun, 10 Mar 2019 21:13:01 GMT https://community.cisco.com/t5/network-access-control/download-acl-doesn-t-work/m-p/440413#M428886 albertog 2019-03-10T21:13:01Z Re: Download acl doesn´t work https://community.cisco.com/t5/network-access-control/download-acl-doesn-t-work/m-p/440414#M428887 <HTML><HEAD></HEAD><BODY><P>I think they are supported, for more information refer</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801a6b34.html#1072494" target="_blank">http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801a6b34.html#1072494</A></P></BODY></HTML> Tue, 12 Jul 2005 15:40:05 GMT https://community.cisco.com/t5/network-access-control/download-acl-doesn-t-work/m-p/440414#M428887 smalkeric 2005-07-12T15:40:05Z