topic Re: ACS in Network Access Control https://community.cisco.com/t5/network-access-control/acs/m-p/468682#M428987 <HTML><HEAD></HEAD><BODY><P>Yes, actually I did it for one and the same device. To access CLI on a switch via TACACS+ authentication and to implement dot1x authentication at the ports of the same switch via RADIUS.</P><P>This is possible by configuring two different network devices for the single switch.</P></BODY></HTML> Thu, 16 Jun 2005 06:30:28 GMT kai.freese 2005-06-16T06:30:28Z ACS https://community.cisco.com/t5/network-access-control/acs/m-p/468680#M428982 <P>Can I configure ACS for Radius and TACACS+ at the same time?</P><P></P><P>Thanks.</P> Sun, 10 Mar 2019 21:11:29 GMT https://community.cisco.com/t5/network-access-control/acs/m-p/468680#M428982 chan-kuen.hui 2019-03-10T21:11:29Z Re: ACS https://community.cisco.com/t5/network-access-control/acs/m-p/468681#M428984 <HTML><HEAD></HEAD><BODY><P>you can configure both tacacs+ and radius on cisco acs server.</P></BODY></HTML> Wed, 15 Jun 2005 21:06:45 GMT https://community.cisco.com/t5/network-access-control/acs/m-p/468681#M428984 wsitu 2005-06-15T21:06:45Z Re: ACS https://community.cisco.com/t5/network-access-control/acs/m-p/468682#M428987 <HTML><HEAD></HEAD><BODY><P>Yes, actually I did it for one and the same device. To access CLI on a switch via TACACS+ authentication and to implement dot1x authentication at the ports of the same switch via RADIUS.</P><P>This is possible by configuring two different network devices for the single switch.</P></BODY></HTML> Thu, 16 Jun 2005 06:30:28 GMT https://community.cisco.com/t5/network-access-control/acs/m-p/468682#M428987 kai.freese 2005-06-16T06:30:28Z