topic Re: authorization on PIX in Network Access Control https://community.cisco.com/t5/network-access-control/authorization-on-pix/m-p/419718#M429184 <HTML><HEAD></HEAD><BODY><P>The commands performed may be controlled locally on the PIX or remotely through TACACS+. RADIUS command authorization is not supported, this is a limitation of the RADIUS protocol. This is quoted from the same document you referred.</P></BODY></HTML> Wed, 11 May 2005 18:26:48 GMT didyap 2005-05-11T18:26:48Z authorization on PIX https://community.cisco.com/t5/network-access-control/authorization-on-pix/m-p/419717#M429182 <P>What's the correct way to configure authorization on PIX?</P><P></P><P>By following the steps in:</P><P><A class="jive-link-custom" href="http://cco/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800949d6.shtml" target="_blank">http://cco/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800949d6.shtml</A></P><P></P><P>The PIX always hangs and has to be rebooted.</P> Sun, 10 Mar 2019 21:08:45 GMT https://community.cisco.com/t5/network-access-control/authorization-on-pix/m-p/419717#M429182 bgrove2913 2019-03-10T21:08:45Z Re: authorization on PIX https://community.cisco.com/t5/network-access-control/authorization-on-pix/m-p/419718#M429184 <HTML><HEAD></HEAD><BODY><P>The commands performed may be controlled locally on the PIX or remotely through TACACS+. RADIUS command authorization is not supported, this is a limitation of the RADIUS protocol. This is quoted from the same document you referred.</P></BODY></HTML> Wed, 11 May 2005 18:26:48 GMT https://community.cisco.com/t5/network-access-control/authorization-on-pix/m-p/419718#M429184 didyap 2005-05-11T18:26:48Z