topic Cannot receive EAP frames ! in Network Access Control https://community.cisco.com/t5/network-access-control/cannot-receive-eap-frames/m-p/386623#M430312 <P>Hi </P><P>for all</P><P></P><P>I tried to run xsupplicant on RHFC1 , after configuring PEAP (mschap v2) on a wired LAN.</P><P></P><P>error msg (in log file) :</P><P>no EAP frame may be send</P><P>socket would block</P><P></P><P>i use a Cisco Secure ACS 3.3 &amp; Cisco Catalyst 2950.</P><P></P><P>please for who had tested PEAP on linux</P><P>can show me how to configure it </P><P>i need a perfect xsupplicant.conf</P><P></P><P>thanks in advance</P><P></P><P>bye</P> Sun, 10 Mar 2019 20:53:39 GMT chiheb278 2019-03-10T20:53:39Z Cannot receive EAP frames ! https://community.cisco.com/t5/network-access-control/cannot-receive-eap-frames/m-p/386623#M430312 <P>Hi </P><P>for all</P><P></P><P>I tried to run xsupplicant on RHFC1 , after configuring PEAP (mschap v2) on a wired LAN.</P><P></P><P>error msg (in log file) :</P><P>no EAP frame may be send</P><P>socket would block</P><P></P><P>i use a Cisco Secure ACS 3.3 &amp; Cisco Catalyst 2950.</P><P></P><P>please for who had tested PEAP on linux</P><P>can show me how to configure it </P><P>i need a perfect xsupplicant.conf</P><P></P><P>thanks in advance</P><P></P><P>bye</P> Sun, 10 Mar 2019 20:53:39 GMT https://community.cisco.com/t5/network-access-control/cannot-receive-eap-frames/m-p/386623#M430312 chiheb278 2019-03-10T20:53:39Z Re: Cannot receive EAP frames ! https://community.cisco.com/t5/network-access-control/cannot-receive-eap-frames/m-p/386624#M430313 <HTML><HEAD></HEAD><BODY><P>Hope this FAQ is helpful for you,</P><P><A class="jive-link-custom" href="http://www.cisco.com/warp/public/102/wlan/linux-clients-faq.html" target="_blank">http://www.cisco.com/warp/public/102/wlan/linux-clients-faq.html</A></P></BODY></HTML> Wed, 24 Nov 2004 17:00:45 GMT https://community.cisco.com/t5/network-access-control/cannot-receive-eap-frames/m-p/386624#M430313 ebreniz 2004-11-24T17:00:45Z