topic Re: Setting Service-Type by device IP in Network Access Control https://community.cisco.com/t5/network-access-control/setting-service-type-by-device-ip/m-p/300981#M430975 <HTML><HEAD></HEAD><BODY><P>Not currently. We are working on adding this in a later release, but no time frame is available at this time.</P></BODY></HTML> Wed, 04 Aug 2004 17:47:33 GMT jhillend 2004-08-04T17:47:33Z Setting Service-Type by device IP https://community.cisco.com/t5/network-access-control/setting-service-type-by-device-ip/m-p/300980#M430974 <P>Hi,</P><P> Is there a way to set the (RADIUS)Service-Type by the device you are logging</P><P>into?</P><P>For Example, </P><P>If User1 telnets to 10.10.10.1 he gets Service-Type=Administrative</P><P></P><P>If User2 telnets to 10.10.10.1 he gets Service-Type=NAS Prompt</P><P></P><P></P><P>Note: I understand that both users can belong to serperate groups and assign different Service-Type</P><P></P><P>BUT for my design,It is mandatory for User1 and User2 to belong to the same group.</P><P></P><P></P><P>I have ACS 3.2</P><P></P><P>Can this be accomplished</P><P></P><P>Thanks and Regards,</P><P>FG</P><P> </P> Sun, 10 Mar 2019 14:56:20 GMT https://community.cisco.com/t5/network-access-control/setting-service-type-by-device-ip/m-p/300980#M430974 fijog 2019-03-10T14:56:20Z Re: Setting Service-Type by device IP https://community.cisco.com/t5/network-access-control/setting-service-type-by-device-ip/m-p/300981#M430975 <HTML><HEAD></HEAD><BODY><P>Not currently. We are working on adding this in a later release, but no time frame is available at this time.</P></BODY></HTML> Wed, 04 Aug 2004 17:47:33 GMT https://community.cisco.com/t5/network-access-control/setting-service-type-by-device-ip/m-p/300981#M430975 jhillend 2004-08-04T17:47:33Z