topic Re: Cant find dot1x guest vlan comands in Network Access Control

Cant find dot1x guest vlan comands

teperjesi — Sun, 10 Mar 2019 21:01:57 GMT

Hi,

I cant find the commands for guest vlan configuration on my switch. I have a 2950-24 with Standard Image.

Can you help me?

Re: Cant find dot1x guest vlan comands

sstudsdahl — Wed, 23 Feb 2005 21:43:20 GMT

What versio of IOS are you running on the 2950? The dot1x guest-vlan command was not introduced until version 12.1(14)EA1 with additional modifications to how the command behaves in 12.1(22)EA2. The link below will describe the modifications to the behavior of this command.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea2/2950cr/cli1.htm#wp3559931

Steve

Re: Cant find dot1x guest vlan comands

jafrazie — Wed, 23 Feb 2005 21:58:44 GMT

Are you running 12.1(22)EA3?

This is new to a 2950 SI image, and should be avail upon that rev of code.

This should help:

<http://www.cisco.com/en/US/partner/products/hw/switches/ps628/prod_release_note09186a00803bc5ea.html#wp638417>