topic ACS 3.2 engine w/ RA on DC fails initial login request in Network Access Control https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323276#M432664 <P>I have a ACS 3.2.11 engine with the RA on a DC. When I attempt to log into a device serviced by the TACACS+, the initial login fails in authentication. Subsequent logins succeed. Come back to the same device a couple of hours later, and the initial login will fail again. Subsequent logins succeed. </P><P>Ideas?</P> Sun, 10 Mar 2019 21:01:24 GMT f.yarnell 2019-03-10T21:01:24Z ACS 3.2 engine w/ RA on DC fails initial login request https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323276#M432664 <P>I have a ACS 3.2.11 engine with the RA on a DC. When I attempt to log into a device serviced by the TACACS+, the initial login fails in authentication. Subsequent logins succeed. Come back to the same device a couple of hours later, and the initial login will fail again. Subsequent logins succeed. </P><P>Ideas?</P> Sun, 10 Mar 2019 21:01:24 GMT https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323276#M432664 f.yarnell 2019-03-10T21:01:24Z Re: ACS 3.2 engine w/ RA on DC fails initial login request https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323277#M432666 <HTML><HEAD></HEAD><BODY><P>Failed attempts entry states: External DB not operational.</P><P>No indication in the WinAgent or CSAgent log files of issue.</P></BODY></HTML> Wed, 16 Feb 2005 21:51:21 GMT https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323277#M432666 f.yarnell 2005-02-16T21:51:21Z Re: ACS 3.2 engine w/ RA on DC fails initial login request https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323278#M432668 <HTML><HEAD></HEAD><BODY><P>I am having the same issue. I am running ACS 3.3.2.2. I am having the problem with both TACACS and VPN authentication. Let me know if you find a solution. I will do the same if I figure anything out.</P></BODY></HTML> Wed, 22 Feb 2006 20:43:19 GMT https://community.cisco.com/t5/network-access-control/acs-3-2-engine-w-ra-on-dc-fails-initial-login-request/m-p/323278#M432668 dbergen 2006-02-22T20:43:19Z