topic Re: ACS service starting error in Network Access Control

ACS service starting error

paltel — Sun, 10 Mar 2019 21:01:01 GMT

I have ACS 3.0 installed, when i run the service for the first time it will started and then stopped. I have these errors at Microsoft Event viewer :

The CSRadius service terminated with service-specific error 45

The CSTacacs service terminated with service-specific error 1066

I need your help

Thanks

Re: ACS service starting error

owillins — Fri, 18 Feb 2005 14:49:30 GMT

The issue you are having is most likely related to installing ACS on an unsupported platform.Please refer to the following link for details on operating system requirements:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/rnwin321.htm

Re: ACS service starting error

marcjone — Wed, 04 May 2005 08:47:54 GMT

Hi all

I am experiencing the same problem on a server running ACS 3.1 on W2K Server SP3 (512MB RAM)

After some discussion with my colleagues, I have been advised that this could be due to a rogue 1700 router being installed on the network

Apparently, if the AAA configuration includes 'configuration authorization' then this breaks ACS !

Has anyone else experienced this problem ?

Many thanks for any help or information

Kind regards

Marcus

Re: ACS service starting error

marcjone — Wed, 04 May 2005 14:51:17 GMT

Specifically, the config which seems to cause the 1700's to break the ACS server is as follows:

aaa authorization commands 1 default group tacacs+ none

aaa authorization commands 15 default group tacacs+ none

Any help or feeback appreciated

Kind regards

Marcus