topic Re: global configuration command: radius-server in Network Access Control

global configuration command: radius-server

maarten.claes — Sun, 10 Mar 2019 21:00:59 GMT

Hi all,

the goal is to authenticate users logging in to a 2950 switch running IOS 12.1(22)EA2 to a MS IAS radius server.

Following the configuration guide, there should be a command radius-server in global configuration mode but I think this command is not available..

anyone has a clue on why this command is not available?

thanks!

Maarten.

paddyxdoyle — Mon, 14 Feb 2005 10:25:26 GMT

Hi,

I believe you have to define the radius server first WITHIN your AAA configuration before you enter it globally.

Example:

aaa new-model

aaa authentication login eap_methods group rad_eap

aaa group server radius rad_eap

server *.*.*.* auth-port 1645 acct-port 1646

radius-server host *.*.*.* auth-port xxx acct-port xxx key xxx

HTH

Paddy

maarten.claes — Mon, 14 Feb 2005 21:31:15 GMT

Hi Paddy,

That was just the hint I was looking for 🙂

It's working fine now!

thanks,

Maarten.