topic Re: Command authorization for Cat OS switch in Network Access Control https://community.cisco.com/t5/network-access-control/command-authorization-for-cat-os-switch/m-p/355331#M432772 <HTML><HEAD></HEAD><BODY><P>As far as I know, that in CatOS you cannot partially permit uses for commands.</P></BODY></HTML> Fri, 04 Feb 2005 17:12:48 GMT umedryk 2005-02-04T17:12:48Z Command authorization for Cat OS switch https://community.cisco.com/t5/network-access-control/command-authorization-for-cat-os-switch/m-p/355330#M432770 <P>Hi,</P><P></P><P>I have a 6509 switch running 6.3(5) and I have tried to set up command authorization to only allow certain users to see the configurations. I've set it up in a IOS based 6509 with success but so far unsuccesful with the cat os based 6509. It seems it's all or nothing as far as enable, config, and exec authorization. Ideally, I would like to give them exec authorization and only show permit configuration but that doesn't seem to be working. I didn't even need to give exec privliges for the ios based switch. </P><P></P><P>Any hints?</P><P></P><P></P><P></P><P>TIA</P> Sun, 10 Mar 2019 20:59:48 GMT https://community.cisco.com/t5/network-access-control/command-authorization-for-cat-os-switch/m-p/355330#M432770 adamlee 2019-03-10T20:59:48Z Re: Command authorization for Cat OS switch https://community.cisco.com/t5/network-access-control/command-authorization-for-cat-os-switch/m-p/355331#M432772 <HTML><HEAD></HEAD><BODY><P>As far as I know, that in CatOS you cannot partially permit uses for commands.</P></BODY></HTML> Fri, 04 Feb 2005 17:12:48 GMT https://community.cisco.com/t5/network-access-control/command-authorization-for-cat-os-switch/m-p/355331#M432772 umedryk 2005-02-04T17:12:48Z