topic Re: AAA Accounting in Network Access Control https://community.cisco.com/t5/network-access-control/aaa-accounting/m-p/379969#M433063 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>On ACS you need to go to SYSTEM CONFIGURATION &gt; LOGGING and make sure CSV RADIUS Accounting is ticked.</P><P></P><P>On your switch, if for example you wanted to monitor system events you would have similar:</P><P></P><P>aaa accounting system default start-stop group radius</P><P></P><P>radius-server host [host_IP_address] auth-port 1645 acct-port 1646 key [shared_secret]</P><P></P><P>You can then view the accounting logs in ACS under REPORTS AND ACTIVITY &gt; RADIUS ACCOUNTING</P><P></P><P>Depending on what you are trying to do, if its just device level stuff you want to log such as commands entereed on switch etc you may be better off using TACACS+.</P><P></P><P>HTH</P><P>Paddy</P></BODY></HTML> Tue, 14 Dec 2004 14:50:13 GMT paddyxdoyle 2004-12-14T14:50:13Z AAA Accounting https://community.cisco.com/t5/network-access-control/aaa-accounting/m-p/379968#M433062 <P>Hi for all !</P><P></P><P>What is the procedure to make for view ing the RADIUS Accounting in ACS 3.3 .</P><P>I use a Catalyst 2950.</P><P></P><P>Thanks in advance</P> Sun, 10 Mar 2019 20:55:48 GMT https://community.cisco.com/t5/network-access-control/aaa-accounting/m-p/379968#M433062 chiheb278 2019-03-10T20:55:48Z Re: AAA Accounting https://community.cisco.com/t5/network-access-control/aaa-accounting/m-p/379969#M433063 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>On ACS you need to go to SYSTEM CONFIGURATION &gt; LOGGING and make sure CSV RADIUS Accounting is ticked.</P><P></P><P>On your switch, if for example you wanted to monitor system events you would have similar:</P><P></P><P>aaa accounting system default start-stop group radius</P><P></P><P>radius-server host [host_IP_address] auth-port 1645 acct-port 1646 key [shared_secret]</P><P></P><P>You can then view the accounting logs in ACS under REPORTS AND ACTIVITY &gt; RADIUS ACCOUNTING</P><P></P><P>Depending on what you are trying to do, if its just device level stuff you want to log such as commands entereed on switch etc you may be better off using TACACS+.</P><P></P><P>HTH</P><P>Paddy</P></BODY></HTML> Tue, 14 Dec 2004 14:50:13 GMT https://community.cisco.com/t5/network-access-control/aaa-accounting/m-p/379969#M433063 paddyxdoyle 2004-12-14T14:50:13Z