AAA and 3560 Switch + CNA

john.gudmann — Sun, 10 Mar 2019 20:54:56 GMT

Has anyone got this to work?

CNA. (Cisco Networks Assistants) and AAA (Tacacs+) on a 3560 switch.

I can’t get the CNA to work in this setup but it works fine on together with 3500XL and 3550 serie switch. With the same parameter.

this is the aaa conf.

aaa authentication login default group tacacs+ local

aaa authentication login no_tacacs enable

aaa authentication enable default enable group tacacs+ none

aaa authorization exec default group tacacs+ local

aaa authorization exec no_tacacs none

aaa authorization commands 15 default group tacacs+ if-authenticated local

aaa authorization commands 15 no_tacacs none

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting network default start-stop group tacacs+

ip http server

ip http authentication aaa

Re: AAA and 3560 Switch + CNA

Thu, 09 Dec 2004 20:54:36 GMT

Did you get any error messages on this?

Re: AAA and 3560 Switch + CNA

john.gudmann — Fri, 10 Dec 2004 20:23:36 GMT

No. I get the prompt for username and password.

and hit enter. Then nothing happens. It looks like it's trying to build the network but it never get fines. I know it works without the aaa statement. But I can’t live with that.

topic AAA and 3560 Switch + CNA in Network Access Control

AAA and 3560 Switch + CNA

Re: AAA and 3560 Switch + CNA

Re: AAA and 3560 Switch + CNA