topic Re: Radius: unsupported accouting type 3 in Network Access Control https://community.cisco.com/t5/network-access-control/radius-unsupported-accouting-type-3/m-p/398258#M433195 <HTML><HEAD></HEAD><BODY><P>Radius does not support command authorization or accounting, there is nothing in the protocol that allows this to happen. Theoretically IOS shouldn't even allow you to configure it but it does, and that's the reason you're getting the error.</P><P></P><P>If you want to do command authorization or accounting then you have to use TACACS.</P></BODY></HTML> Mon, 22 Nov 2004 23:54:38 GMT gfullage 2004-11-22T23:54:38Z Radius: unsupported accouting type 3 https://community.cisco.com/t5/network-access-control/radius-unsupported-accouting-type-3/m-p/398257#M433191 <P>I am getting the following error:</P><P>RADIUS: unsupported accounting type 3 for user "bcxadm"aa accounting commands 15 default start-stop group radius</P><P></P><P>If I remove the following:</P><P>aaa accounting commands 15 default start-stop group radius</P><P>the error does not happen anymore.</P><P></P><P>An suggestions why this error happens when I enable aaa accounting?</P> Sun, 10 Mar 2019 20:53:59 GMT https://community.cisco.com/t5/network-access-control/radius-unsupported-accouting-type-3/m-p/398257#M433191 johanlr 2019-03-10T20:53:59Z Re: Radius: unsupported accouting type 3 https://community.cisco.com/t5/network-access-control/radius-unsupported-accouting-type-3/m-p/398258#M433195 <HTML><HEAD></HEAD><BODY><P>Radius does not support command authorization or accounting, there is nothing in the protocol that allows this to happen. Theoretically IOS shouldn't even allow you to configure it but it does, and that's the reason you're getting the error.</P><P></P><P>If you want to do command authorization or accounting then you have to use TACACS.</P></BODY></HTML> Mon, 22 Nov 2004 23:54:38 GMT https://community.cisco.com/t5/network-access-control/radius-unsupported-accouting-type-3/m-p/398258#M433195 gfullage 2004-11-22T23:54:38Z