Using RSA SecureID as External DB

emily — Sun, 10 Mar 2019 20:53:18 GMT

I used ACS 3.3 act as authentication server , Now i want using RSA SecureID act ACS external DB , but i met some error message , below

"Third-Party DLL require to support this external database"

anyone can tell me ????

Re: Using RSA SecureID as External DB

myer.ramey — Fri, 12 Nov 2004 15:46:34 GMT

You have to install the RSA ACE Client (either for UNIX or Windows) on the CiscoACS server. I only have this configured on a Windows 2000 server so I can only provide you the steps for that.

1) Download the RSA ACE client from http://www.rsa.com

2) Copy the "sdconf.rec" file from your RSA SecureID server to the c:\winnt\system32 directory

3) Install the client on the CiscoACS server (during the install, you will be asked for the location of your sdconf.rec file, which is in c:\winnt\system32)

4) Make sure you have a valid user ID/token to test with and test connectivity using the "test connectivity" application after install.

5) In CiscoACS go to External User Database -> Database Configuration -> RSA SecureID Token Server -> Configure -> (you should see the "sdconf.rec" file on your ACS server now...the configuration is complete).

You can now configure users/groups to user SecureID as an authentication. Let me know if this helps!

topic Re: Using RSA SecureID as External DB in Network Access Control

Using RSA SecureID as External DB

Re: Using RSA SecureID as External DB