topic Re: async callin radius authentication can not work in Network Access Control https://community.cisco.com/t5/network-access-control/async-callin-radius-authentication-can-not-work/m-p/298400#M433684 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>would like to know the purpose of if needed in ur config there ?did u try wihtout tht statement for u r ppp authenticaton ?</P><P></P><P>regds</P><P></P></BODY></HTML> Sat, 28 Aug 2004 08:31:25 GMT spremkumar 2004-08-28T08:31:25Z async callin radius authentication can not work https://community.cisco.com/t5/network-access-control/async-callin-radius-authentication-can-not-work/m-p/298399#M433682 <P>my 2501 router's IOS version is 11.11</P><P>and vty can pass auth.the config is:</P><P></P><P>aaa new-model</P><P>aaa authentication login huateng radius</P><P>aaa authentication ppp huateng if-needed radius</P><P>ip radius source-interface Ethernet0</P><P></P><P>interface Async1</P><P> ip unnumbered Ethernet0</P><P> ip tcp header-compression passive</P><P> encapsulation ppp</P><P> bandwidth 38</P><P> async mode interactive</P><P> peer default ip address pool huateng_17</P><P> no cdp enable</P><P> ppp authentication chap huateng</P><P></P><P>ip local pool huateng_17 130.252.17.200 130.252.17.205</P><P></P><P>radius-server host 130.252.234.234</P><P>radius-server key ciscopix</P><P></P><P>line aux 0</P><P> autoselect during-login</P><P> autoselect ppp</P><P> modem InOut</P><P> login authentication huateng</P><P> modem autoconfigure discovery</P><P> transport input all</P><P> stopbits 1</P><P> rxspeed 38400</P><P> txspeed 38400</P><P> flowcontrol hardware</P><P>line vty 0 4</P><P> login authentication huateng</P> Sun, 10 Mar 2019 20:46:30 GMT https://community.cisco.com/t5/network-access-control/async-callin-radius-authentication-can-not-work/m-p/298399#M433682 it_zhu 2019-03-10T20:46:30Z Re: async callin radius authentication can not work https://community.cisco.com/t5/network-access-control/async-callin-radius-authentication-can-not-work/m-p/298400#M433684 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>would like to know the purpose of if needed in ur config there ?did u try wihtout tht statement for u r ppp authenticaton ?</P><P></P><P>regds</P><P></P></BODY></HTML> Sat, 28 Aug 2004 08:31:25 GMT https://community.cisco.com/t5/network-access-control/async-callin-radius-authentication-can-not-work/m-p/298400#M433684 spremkumar 2004-08-28T08:31:25Z