topic Re: Radius & Tacacs in Network Access Control https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287034#M433705 <HTML><HEAD></HEAD><BODY><P></P><P>Give both APs a unique hostname, eg. aptest (using RADIUS Cisco Aironet), aptest+ (TACACS+). </P></BODY></HTML> Mon, 20 Sep 2004 22:34:54 GMT jasonlow 2004-09-20T22:34:54Z Radius & Tacacs https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287032#M433703 <P>I have a Cisco AP1200, I want admin access to be authenticated via Tacacs+ and wireless users to be authenticated be Radius. However I cannot seem to set the ACS 3.2 to accept both types of authentication for one device, either one or the other. I have tried adding two devices in, one for each type of authentication, however you cannot have two devices with the same name. Is there a possible work-around for this?</P> Sun, 10 Mar 2019 20:46:18 GMT https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287032#M433703 will.shaw 2019-03-10T20:46:18Z Re: Radius & Tacacs https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287033#M433704 <HTML><HEAD></HEAD><BODY><P>I do not think this is possible.</P></BODY></HTML> Tue, 31 Aug 2004 21:06:09 GMT https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287033#M433704 a-vazquez 2004-08-31T21:06:09Z Re: Radius & Tacacs https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287034#M433705 <HTML><HEAD></HEAD><BODY><P></P><P>Give both APs a unique hostname, eg. aptest (using RADIUS Cisco Aironet), aptest+ (TACACS+). </P></BODY></HTML> Mon, 20 Sep 2004 22:34:54 GMT https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287034#M433705 jasonlow 2004-09-20T22:34:54Z Re: Radius & Tacacs https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287035#M433706 <HTML><HEAD></HEAD><BODY><P>hi Will,</P><P></P><P>all you need is to setup two group under "Network Device Groups" then you can use one group for Radius and other group for Tacacs.</P><P></P><P>For that follow this path:</P><P></P><P>Interface Configuration--&gt;Advanced Options--&gt;(check)Network Device Groups</P><P></P><P>I hope this helps</P><P></P></BODY></HTML> Tue, 21 Sep 2004 04:26:42 GMT https://community.cisco.com/t5/network-access-control/radius-tacacs/m-p/287035#M433706 ozlemduran 2004-09-21T04:26:42Z