topic Re: Groups missing ACS 3.2 in Network Access Control

Groups missing ACS 3.2

fatimaortega — Sun, 10 Mar 2019 20:46:13 GMT

In group setup only appear 100 groups instead of 500.

Is there any procedure to have the 500 groups in Group Setup?

Re: Groups missing ACS 3.2

will.shaw — Wed, 25 Aug 2004 10:07:02 GMT

Cisco Secure ACS dynamically builds the Group Setup section interface depending on the configuration of your network devices and the security protocols being used. That is, what you see under Group Setup is affected by both your system's network configuration and your settings in the Interface Configuration section.

Re: Groups missing ACS 3.2

fatimaortega — Wed, 25 Aug 2004 13:03:35 GMT

I use same configuration (restore .dmp file, ) and interface options in other Cisco Secure v3.2.

I can see 500 groups.

How can I increase the group number from 100 to 500?

Re: Groups missing ACS 3.2

will.shaw — Fri, 27 Aug 2004 14:34:12 GMT

You do of course need to have admin access to all the groups;

Check in Administration Control, Click your username, under administrator privileges make sure all the 'available groups' are in the 'editable groups' list box.

That should probably solve your issue.

Re: Groups missing ACS 3.2

fatimaortega — Thu, 02 Sep 2004 16:44:12 GMT

Thanks, now its working fine