topic Re: cat os set password in Network Access Control

cat os set password

karholue — Sun, 10 Mar 2019 20:45:53 GMT

I used the set password command in a wrong way and cant login anymore.

Catalyst 6000 #version 5.5(1)

I just pasted this into my telnet window:

Cat6k> (enable) set password <mynewpass>

Usage: set password

Cat6k> (enable) set enablepass <mynewenablepass>

Usage: set enablepass

Cat6k> (enable) exit

Connection closed by foreign host.

After this I could not connect anymore. Even console did not work.

Enter password:

Connection closed by foreign host.

...

Sorry. Try again.

Command syntax error should not allow to overwrite the settings ??

What should I do ? - Which password might work ? Thanks in advance.

Karsten Holmberg

holmberg@uni-lueneburg.de

Re: cat os set password

Richard Burts — Mon, 23 Aug 2004 12:50:35 GMT

There is a password recovery procedure which includes the Catalyst 6000. Use this URL:

http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_password_recovery09186a00801349aa.shtml

HTH

Rick

Re: cat os set password

abdulma — Wed, 25 Aug 2004 08:11:37 GMT

Hi,

Can we use the same procedure to recover the switch that configure with taccacs? I need to recover the password for cat5000 series configured with taccacs. cause accidentally configured the wrong gateway and the switch can't find the taccacs server and don't remember the local password. The timeout for the taccacs longger than 3 minutes.

TACACS: Unable to contact Server

Trying Local Login Authentication

Enter password: