How can I enable 802.1x in Windows2000 sp4 ?

cjrchoi11 — Sun, 10 Mar 2019 14:55:10 GMT

I want to implement 802.1x with Windows2000 pro-SP4 and Catalyst switches. Not wireless but through RJ45 cable connection.

How can I enable the 802.1x in the W2K SP4 ?

Thanks,

Re: How can I enable 802.1x in Windows2000 sp4 ?

jafrazie — Tue, 20 Jul 2004 18:24:51 GMT

802.1x support should come by default with SP4 as it contains functionality from the SP3 hotfix for 802.1x ( Microsoft Knowledge Base Article - 313664). After enabling or upgrading to SP4 though, you need to enable the Wireless Zero Config Service.

You'll notice you see an Authentication Tab under your Local Area Connection properties window upon doing so.

Hope this helps.

Re: How can I enable 802.1x in Windows2000 sp4 ?

cjrchoi11 — Tue, 20 Jul 2004 19:08:41 GMT

Thanks your prompt reply,

I can get the authentiation tab since start the wireless service but problem to authenticating.

1. w2k client.

enable 802.1x and EAP type=MD5-challenge

2. 6509

aaa new-model

aaa authentication login default group radius

aaa authentication dot1x default group radius

aaa authorization network default group radius

dot1x system-auth-control

interface GigabitEthernet6/2

no ip address

logging event link-status

switchport

switchport access vlan 10

switchport mode access

dot1x port-control auto

radius-server host 10.147.153.100 auth-port 1812 acct-port 1813 key 7 071B245F5A

3. CSACS

- create network interface with RADIUS-IEEE

- configure RADIUS attribute 64,65,81

4. I attach a station into the 6509 port g6/2 and successfuly get the prompt but authenticaiton fail with the following messages,

*Jul 20 19:34:23: dot1x-ev:Got a Request from SP to send it to Radius with id 8

*Jul 20 19:34:23: dot1x-ev:Couldn't Find a process thats already handling the re

quest for this id 0

*Jul 20 19:34:23: dot1x-ev:Found a free slot at slot 0

*Jul 20 19:34:23: dot1x-ev:dot1x_send_resp_to_server: copying mac=0003.4793.7b22

*Jul 20 19:34:23: dot1x-ev:Created a New process with Id 149

*Jul 20 19:34:23: dot1x-ev:Successfully created a process to handle this aaa req

uest

*Jul 20 19:34:23: dot1x-ev:Inserted the request on to list of pending requests

*Jul 20 19:34:23: dot1x-ev:Request id = 8 and length = 9

*Jul 20 19:34:23: dot1x-ev:The Interface on which we got this AAA Request is Gig

abitEthernet6/2

*Jul 20 19:34:23: dot1x-ev:Username is test

*Jul 20 19:34:23: dot1x-ev:MAC Address is 0000.0000.0000

*Jul 20 19:34:23: RADIUS: ustruct sharecount=2

*Jul 20 19:34:23: Radius: radius_port_info() success=0 radius_nas_port=1

*Jul 20 19:34:23: RADIUS: EAP-login: RemAddr =3030.2d30.302d

*Jul 20 19:34:23: RADIUS: EAP-login: length of radius packet = 98 code = 1

*Jul 20 19:34:23: RADIUS: Initial Transmit GigabitEthernet6/2 id 16 10.147.153.1

00:1812, Access-Request, len 98

*Jul 20 19:34:23: Attribute 4 6 0A939901

*Jul 20 19:34:23: Attribute 61 6 00000000

*Jul 20 19:34:23: Attribute 1 6 74657374

*Jul 20 19:34:23: Attribute 6 6 00000002

*Jul 20 19:34:23: Attribute 12 6 000003E8

*Jul 20 19:34:23: Attribute 31 19 30302D30

*Jul 20 19:34:23: Attribute 79 11 02000009

*Jul 20 19:34:23: Attribute 80 18 4B982008

*Jul 20 19:34:28: RADIUS: Retransmit id 16

*Jul 20 19:34:33: RADIUS: Retransmit id 16

*Jul 20 19:34:38: RADIUS: Retransmit id 16

*Jul 20 19:34:43: RADIUS: Tried all servers.

*Jul 20 19:34:43: RADIUS: No valid server found. Trying any viable server

*Jul 20 19:34:43: RADIUS: Tried all servers.

*Jul 20 19:34:43: RADIUS: No response for id 16

*Jul 20 19:34:43: dot1x-err:Dot1x Authentication failed

*Jul 20 19:34:43: dot1x-ev:The process does its job, so killing itself

*Jul 20 19:35:07: %LINK-3-UPDOWN: Interface GigabitEthernet6/2, changed state to

down

*Jul 20 19:35:07: %LINK-SP-3-UPDOWN: Interface GigabitEthernet6/2, changed state

to down

Any idea based on the debugging message ?

Thanks,

Re: How can I enable 802.1x in Windows2000 sp4 ?

cjrchoi11 — Tue, 20 Jul 2004 20:36:01 GMT

it's mis-configuraiton the radius in 6509.

ip radius source-interface Vlan10

radius-server key 7 120D000406

Thanks,

topic Re: How can I enable 802.1x in Windows2000 sp4 ? in Network Access Control

How can I enable 802.1x in Windows2000 sp4 ?

Re: How can I enable 802.1x in Windows2000 sp4 ?

Re: How can I enable 802.1x in Windows2000 sp4 ?

Re: How can I enable 802.1x in Windows2000 sp4 ?