topic Re: How can I disconnect user after the expiration date in Network Access Control

How can I disconnect user after the expiration date

tamer — Sun, 10 Mar 2019 14:50:44 GMT

I have users on AS5800, I want to disconnect the online user immediatly ( online) after the expiration date of the user. and what is the attribute that can do that, Also I want to disconnect the online users using radius. is that applicable or not

Re: How can I disconnect user after the expiration date

Richard Burts — Sat, 29 May 2004 18:23:06 GMT

I am not sure if you really mean the expiration date of the user (how often do you exire users?) or you want to enforce limits on the user session. If you want to limit the user session there are session timeout parameters that you can configure on the AS5800 to do the job.

Re: How can I disconnect user after the expiration date

tamer — Sun, 30 May 2004 08:01:15 GMT

No I want the expiration date not timeoute parameter, I mean if u had a 1 month account and i want in specific day ( expiration date of user 22/1/2004 as example) to disconnect the online user from radius. is that applicable, there is cisco propritary attribute # 21 called password expiration date can this attribute disconnect the user.

Thanx in advance

Re: How can I disconnect user after the expiration date

anjo — Tue, 29 Jun 2004 21:04:59 GMT

You can use RADIUS Packet-of-Disconnect feature.

This requires however that the POD packet is being sent from the RADIUS server, meaning a script or application must be running on the RADIUS server in order to trigger the event.

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087ccd.html