topic Re: unable to log into CMS when configured for TACACS+ in Network Access Control https://community.cisco.com/t5/network-access-control/unable-to-log-into-cms-when-configured-for-tacacs/m-p/283564#M434307 <HTML><HEAD></HEAD><BODY><P>Please re-enter the key on both device and ACS by hand (no cut and paste!) and restart .</P></BODY></HTML> Tue, 01 Jun 2004 13:21:57 GMT umedryk 2004-06-01T13:21:57Z unable to log into CMS when configured for TACACS+ https://community.cisco.com/t5/network-access-control/unable-to-log-into-cms-when-configured-for-tacacs/m-p/283563#M434306 <P>we are having an issue when trying to run CMS on a device which is configured for TACACS+ . Telneting to the device works fine and authenticates you against the ACS server but when you try and run CMS it just hangs while trying to load the feature menus. It seems to get through the authentication fine upto that point, as there are no failure entries in the ACS logs.</P><P></P><P>our test switch is a 3550 G-12 running IOS 12.1(20)ea1a</P><P></P><P></P><P>we have set the following AAA commands just to try and get it to work.</P><P></P><P>aaa new-model</P><P>aaa authentication login default group tacacs+</P><P>aaa authorization exec default group tacacs+</P><P>ip http server</P><P>ip http authentication aaa</P><P>tacacs-server host xxx.xxx.xxx.xxx</P><P>tacacs-server key xxxxxxxxxxxx</P><P></P><P>has anyone had a similar issue with getting CMS to play with ACS, or has anyone an answer to this problem?</P><P></P><P>Thanks in advance</P><P></P><P></P><P></P> Sun, 10 Mar 2019 14:50:00 GMT https://community.cisco.com/t5/network-access-control/unable-to-log-into-cms-when-configured-for-tacacs/m-p/283563#M434306 markpoulton 2019-03-10T14:50:00Z Re: unable to log into CMS when configured for TACACS+ https://community.cisco.com/t5/network-access-control/unable-to-log-into-cms-when-configured-for-tacacs/m-p/283564#M434307 <HTML><HEAD></HEAD><BODY><P>Please re-enter the key on both device and ACS by hand (no cut and paste!) and restart .</P></BODY></HTML> Tue, 01 Jun 2004 13:21:57 GMT https://community.cisco.com/t5/network-access-control/unable-to-log-into-cms-when-configured-for-tacacs/m-p/283564#M434307 umedryk 2004-06-01T13:21:57Z