Replication problem

sachin — Sun, 10 Mar 2019 14:41:13 GMT

We are facing problem with the replication--

I cannot take backup from GUI but i can take backup with command prompt with CSutil utility. Log collected in CSAuth file is as follows--

************************************

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) reload reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAuth\CRCs from file C:\Program Files\CiscoSecure ACS v3.2\CSAuth\DbSyncScratch\CRCREG.RDF

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) Failed to copy directory C:\Program Files\CiscoSecure ACS v3.2\DCS to C:\Program Files\CiscoSecure ACS v3.2\CSAuth\DbSyncScratch\\DCS Reason 5

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\Device Command Set Types

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAuth\AgingPolicies

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot copy file C:\Program Files\CiscoSecure ACS v3.2\CSAuth\user.dat

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot copy file C:\Program Files\CiscoSecure ACS v3.2\CSauth\user.idx

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot copy file C:\Program Files\CiscoSecure ACS v3.2\CSauth\varsdb.mdb

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\Hosts

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\Network Device Groups

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\ProxyTable\Entries

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\Dictionaries\000

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAdmin\config

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAdmin\Administrators

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAdmin\Security

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAuth\Password Rules

AUTH 02/29/2004 11:49:32 E 0951 6404 Comms lib:CSBackupRestore(OUT) cannot save reg key SOFTWARE\Cisco\CiscoAAAv3.2\CSAuth\UserPasswordChange

AUTH 02/29/2004 11:49:32 E 1651 6404 DBReplicate(OUT) cannot backup sync aborted

*******************

what could be the problem ? Can anyone help me ?

Re: Replication problem

m.chase — Wed, 03 Mar 2004 18:06:01 GMT

When we upgraded from ACS 3.1 to 3.2, replication broke. There's a registry fix & patch for that. Basically replication took too long so the CSMon service thought ACS died and would reset the services thus breaking the replication in process. The registry fix allows you to set an interval for the CsMon checking to be long enough to allow replication to complete. Contact TAC, they can fill you in.

Re: Replication problem

sachin — Thu, 04 Mar 2004 05:18:55 GMT

We have not upgraded ACS from 3.1 to 3.2, infact we have installed 3.2 version directly.

Re: Replication problem

sachin — Fri, 19 Mar 2004 08:11:52 GMT

Problem solved.I formatted the system and reinstalled it. Replication and backup both are happening now.It was microsoft..not the cisco !!!!!

Thanks

topic Re: Replication problem in Network Access Control

Replication problem

Re: Replication problem

Re: Replication problem

Re: Replication problem