topic user access filtered in Network Access Control

user access filtered

gaban — Sun, 10 Mar 2019 14:39:58 GMT

Does anybody know what the error "user access filtered: on the "failed attempts" section under Reports and Activities on ACS means and how would I correct this.

I created a group in AD and a added " XX" user on that group. I created a group in ACS and mapped that group to AD. When I login I get the error above.

thanks,

gilbert

Re: user access filtered

mhoda — Mon, 16 Feb 2004 06:23:13 GMT

Hello Gilbert,

This error message is very generic. You may see this for number of reason. Here are few things to check-

-Make sure that you have AD groups mapped to one of the ACS groups. Otherwise, if you have "NO Access" then you will see this messgae.

-Under "Unknown user policy", make sure to have "Check the following external user databases" box checked and list your AD as "Selected Database".

-Under Database Configuration, if you have "Verify that "Grant dialin permission to user" then make sure that this is also checked in the AD users. You may want to uncheck this and see if that helps. My suggestion would be to allow this on the AD when you create users.

Thanks,

Mynul

Re: user access filtered

mahowald — Sat, 12 Jun 2004 03:02:31 GMT

The only time i have seen this is was two weeks ago when I tried to upgrade my IOS on my 3060 to 4.0.5. Opened a TAC and after four hours and two esculations through Cisco, they found documentation on this being a bug in 4.0.5. I went back to 4.0.1.