topic Re: Windows IIS Radius server config (NT, not 2k) in Network Access Control https://community.cisco.com/t5/network-access-control/windows-iis-radius-server-config-nt-not-2k/m-p/245619#M434888 <HTML><HEAD></HEAD><BODY><P>Try enabling RSVP. If RSVP is not enabled, a 10 sec post-dial delay occurs before the gateway forwards the call.</P></BODY></HTML> Tue, 10 Feb 2004 21:50:47 GMT 2004-02-10T21:50:47Z Windows IIS Radius server config (NT, not 2k) https://community.cisco.com/t5/network-access-control/windows-iis-radius-server-config-nt-not-2k/m-p/245618#M434887 <P>I'm trying to configure a pix 515 running 6.2.1 to allow vpn client authentication through a windows NT 4 server running IIS with radius server.</P><P></P><P>Currently I have it configured to allow pptp client connections and it works fine. Now I'm trying to configure Cisco VPN client 3.x connections using radius . Everything works fine until the user authentication, then it times out. I'm assuming the default profile on the Raduis server is not adequate, but the only sample configs I find here are for Win2k with IAS. </P><P></P><P>Can anybody help out? Do I need to create a new profile on the radius server? Or just add settings to the default (which works fine for pptp).</P><P></P><P>Thanks,</P><P></P><P>Rick</P> Sun, 10 Mar 2019 14:39:23 GMT https://community.cisco.com/t5/network-access-control/windows-iis-radius-server-config-nt-not-2k/m-p/245618#M434887 0rsnaric 2019-03-10T14:39:23Z Re: Windows IIS Radius server config (NT, not 2k) https://community.cisco.com/t5/network-access-control/windows-iis-radius-server-config-nt-not-2k/m-p/245619#M434888 <HTML><HEAD></HEAD><BODY><P>Try enabling RSVP. If RSVP is not enabled, a 10 sec post-dial delay occurs before the gateway forwards the call.</P></BODY></HTML> Tue, 10 Feb 2004 21:50:47 GMT https://community.cisco.com/t5/network-access-control/windows-iis-radius-server-config-nt-not-2k/m-p/245619#M434888 2004-02-10T21:50:47Z