topic Write command with Privilege 7 in Network Access Control https://community.cisco.com/t5/network-access-control/write-command-with-privilege-7/m-p/240482#M434900 <P>Hi!</P><P></P><P>I am using local authorization. I have entered several commands with the privilege 7 command. I also included the copy running startup but when I try to save I see an error that says that the file is not present. When I use the privilege 15 I can copy OK. What do I have to do to enable the copy run start with privilege 7.</P><P></P><P>Thanks,</P><P></P><P>Mario</P> Sun, 10 Mar 2019 14:39:11 GMT msocarras 2019-03-10T14:39:11Z Write command with Privilege 7 https://community.cisco.com/t5/network-access-control/write-command-with-privilege-7/m-p/240482#M434900 <P>Hi!</P><P></P><P>I am using local authorization. I have entered several commands with the privilege 7 command. I also included the copy running startup but when I try to save I see an error that says that the file is not present. When I use the privilege 15 I can copy OK. What do I have to do to enable the copy run start with privilege 7.</P><P></P><P>Thanks,</P><P></P><P>Mario</P> Sun, 10 Mar 2019 14:39:11 GMT https://community.cisco.com/t5/network-access-control/write-command-with-privilege-7/m-p/240482#M434900 msocarras 2019-03-10T14:39:11Z Re: Write command with Privilege 7 https://community.cisco.com/t5/network-access-control/write-command-with-privilege-7/m-p/240483#M434901 <HTML><HEAD></HEAD><BODY><P>From what I know, doing local authentication/authorization &amp; assigning privilege levels doesn't work too well. There are some bugs filed with issues on wild-card numbers and so on. It would be better to leave it to the default privelege levels.</P><P></P></BODY></HTML> Mon, 09 Feb 2004 20:59:46 GMT https://community.cisco.com/t5/network-access-control/write-command-with-privilege-7/m-p/240483#M434901 owillins 2004-02-09T20:59:46Z