topic Re: CAT4006 & CAT6509 radius authorization in Network Access Control https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215885#M435333 <HTML><HEAD></HEAD><BODY><P>Yes, I had read it hard. But when I set Service-type to 6, some switch works and some doesn't. I want to know the different between those.</P><P>Thanks for your reply!</P></BODY></HTML> Mon, 27 Oct 2003 08:16:20 GMT changh 2003-10-27T08:16:20Z CAT4006 & CAT6509 radius authorization https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215883#M435330 <P>I setup a radius server to apply aaa on routers and switches.In routers, using local privilege and work well. In switches, it just gets into exec mode. When I set radius profile, just one 6509 can become enable prompt, others fail.I checked the version, 6509 for 6.4(4) worked, 6509 for 6.1 failed, 4006 for 5.5 failed. In <A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk583/tk642/technologies_tech_note09186a0080094ea4.shtml#f" target="_blank">http://www.cisco.com/en/US/tech/tk583/tk642/technologies_tech_note09186a0080094ea4.shtml#f</A>, it said radius could exec authorization after 5.4. Why? Can anybody help? Thanks.</P> Sun, 10 Mar 2019 14:31:14 GMT https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215883#M435330 changh 2019-03-10T14:31:14Z Re: CAT4006 & CAT6509 radius authorization https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215884#M435332 <HTML><HEAD></HEAD><BODY><P>Step F in the document has an interesting note. If the service-type is set for anything other than 6-administrative (for example, 1-login, 7-shell, or 2-framed), the user arrives at the switch exec prompt, but not the enable prompt. This is problem you seem to be running into. Set the Service-Type (RADIUS attribute 6) to Administrative. </P><P></P></BODY></HTML> Fri, 17 Oct 2003 14:34:19 GMT https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215884#M435332 jsivulka 2003-10-17T14:34:19Z Re: CAT4006 & CAT6509 radius authorization https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215885#M435333 <HTML><HEAD></HEAD><BODY><P>Yes, I had read it hard. But when I set Service-type to 6, some switch works and some doesn't. I want to know the different between those.</P><P>Thanks for your reply!</P></BODY></HTML> Mon, 27 Oct 2003 08:16:20 GMT https://community.cisco.com/t5/network-access-control/cat4006-cat6509-radius-authorization/m-p/215885#M435333 changh 2003-10-27T08:16:20Z