topic Re: IP Address asignment with ACS Server in Network Access Control

IP Address asignment with ACS Server

jgross — Sun, 10 Mar 2019 14:31:00 GMT

Hello,

at the ACS server in the user setup there is a field

Client IP Address Assignment.

There I can select a static ip addresss for a client.

When I do so, does the ACS only check, if the client uses this IP address, and if not, the access is denied, and the assignment of the right IP address has to be handeled on the DHCP server or somewhere else,

or is this address then assigned to the endstation

via DHCP by the ACS Server, or can the ACS Server communicate with a DHCP Server to tell him to asign this IP address to a particular client ?

Can you please explain that?

Bye

Re: IP Address asignment with ACS Server

nkhawaja — Wed, 08 Oct 2003 20:08:10 GMT

HI,

ACS will not check that the client has this ip or not, but it will try to assign this IP to the client. DHCP will not be contacted either.

Thanks

Nadeem

Re: IP Address asignment with ACS Server

kalyanccie — Thu, 30 Oct 2003 09:39:21 GMT

Dear nadeem

have you tried this out succesfully.

any help on this greatly appreciated, also did you try out with W2K also apart from XP.

regards

kalyan

Re: IP Address asignment with ACS Server

kalyanccie — Thu, 06 Nov 2003 01:20:51 GMT

Dear All

I really dont understand, who has to take the initiative here, Cisco or Microsoft.

I am trying with Linux, if it is not working, ACS has to be Coded again i guess.

thanks a lot

kalyan