topic Re: AAA+PIX in Network Access Control https://community.cisco.com/t5/network-access-control/aaa-pix/m-p/398803#M435538 <HTML><HEAD></HEAD><BODY><P>Hello gcocchi:</P><P></P><P>Please try the following:</P><P></P><P>"username gcocchi password <PASSSWORD> privilege 5</PASSSWORD></P><P>privilege show level 5 command running-config</P><P>aaa authorization command LOCAL"</P><P></P><P>and see if it works for you.</P><P></P><P>Thanks,</P><P>Binh</P></BODY></HTML> Tue, 26 Oct 2004 23:07:09 GMT hoangbp 2004-10-26T23:07:09Z AAA+PIX https://community.cisco.com/t5/network-access-control/aaa-pix/m-p/398802#M435537 <P>Hi.</P><P></P><P>I'm trying to make a profile with privilege 2 to permit a user to do some modification to configuration file.</P><P>I would like to permit user to issue command "write terminal" to show the conf, but when i create profile level 2 privilege with command</P><P>"privilege configure level 2 command write terminal" i got an error:</P><P>"Incorrect options or arguments."</P><P>If i issue</P><P>"privilege configure level 2 command write" all is ok, but now all writing are permitted.</P><P>How can i setup local privilege with a specific command terminal?</P><P>Thx. </P> Sun, 10 Mar 2019 20:52:06 GMT https://community.cisco.com/t5/network-access-control/aaa-pix/m-p/398802#M435537 gcocchi 2019-03-10T20:52:06Z Re: AAA+PIX https://community.cisco.com/t5/network-access-control/aaa-pix/m-p/398803#M435538 <HTML><HEAD></HEAD><BODY><P>Hello gcocchi:</P><P></P><P>Please try the following:</P><P></P><P>"username gcocchi password <PASSSWORD> privilege 5</PASSSWORD></P><P>privilege show level 5 command running-config</P><P>aaa authorization command LOCAL"</P><P></P><P>and see if it works for you.</P><P></P><P>Thanks,</P><P>Binh</P></BODY></HTML> Tue, 26 Oct 2004 23:07:09 GMT https://community.cisco.com/t5/network-access-control/aaa-pix/m-p/398803#M435538 hoangbp 2004-10-26T23:07:09Z