topic Re: AAA Caller-ID with RADIUS in Network Access Control

AAA Caller-ID with RADIUS

sivanovski — Sun, 10 Mar 2019 14:48:17 GMT

Hi all

I'm facing problems with restricting access from a single phone No. With TACACS I'm setting up

>Network Access Restrictions (NAR)

>DNIS <Phone No>

And works fine.

But when using RADIUS I allways get user access filtered.

Any sugestions

Thanks

Re: AAA Caller-ID with RADIUS

drolemc — Fri, 21 May 2004 15:56:41 GMT

Here is some second hand info that might work. It seems that this behaviour might be seen if you only have IP-based restrictions defined and the CLI/DNIS section is unchecked. Duplicating your settings under CLI/DNIS should work.

Re: AAA Caller-ID with RADIUS

jdughi — Sat, 22 May 2004 16:35:27 GMT

Hi, can the original poster let us know 1) did his/her problem get resolved? 2) how? 3) did what the other/2nd poster to this thread make an observation that applied to this situation? Thank you.

Re: AAA Caller-ID with RADIUS

sivanovski — Mon, 24 May 2004 06:23:48 GMT

NO IP-based restrictions are defined. That box under groups and User is unchecked.

In the CLI/DNIS-based Access restriction I have.

port: *

CLI: *

DNIS: *3 ( Phone No, or * with One Number. With one * it works)

I use Radius and ACS 3.1

I duplicate settings. I add 2 identical row's, but still have problems.