topic 802.1x multi-authentication in Network Access Control https://community.cisco.com/t5/network-access-control/802-1x-multi-authentication/m-p/214681#M435642 <P>I want to attest by two or more systems by "802.1x." However, it does not operate normally.</P><P>A setup is as follows.</P><P>aaa authentication dot1x default group raduis local</P> Sun, 10 Mar 2019 14:38:36 GMT gaku 2019-03-10T14:38:36Z 802.1x multi-authentication https://community.cisco.com/t5/network-access-control/802-1x-multi-authentication/m-p/214681#M435642 <P>I want to attest by two or more systems by "802.1x." However, it does not operate normally.</P><P>A setup is as follows.</P><P>aaa authentication dot1x default group raduis local</P> Sun, 10 Mar 2019 14:38:36 GMT https://community.cisco.com/t5/network-access-control/802-1x-multi-authentication/m-p/214681#M435642 gaku 2019-03-10T14:38:36Z Re: 802.1x multi-authentication https://community.cisco.com/t5/network-access-control/802-1x-multi-authentication/m-p/214682#M435643 <HTML><HEAD></HEAD><BODY><P> 1. You need to put accounting under the SSID.</P><P></P><P> 2. XL switches do not have capabilities to support dot1x since they are standard layer 2 switches.</P><P></P></BODY></HTML> Fri, 30 Jan 2004 15:17:19 GMT https://community.cisco.com/t5/network-access-control/802-1x-multi-authentication/m-p/214682#M435643 umedryk 2004-01-30T15:17:19Z