topic LAN To LAN Radius Authentication in Network Access Control https://community.cisco.com/t5/network-access-control/lan-to-lan-radius-authentication/m-p/220223#M435683 <P>Hi</P><P></P><P>I have the following scenario. I have a central site with a 3745 router containing a PRI card and a number of remote sites with a mixture of 1721 and 1761 routers.</P><P></P><P>I have both routers set-up to RADIUS authenticate users logging onto the routers themselves either by telnet or HTTP, and have the remote end being authenticated by RADIUS for PPP. However, I can't seem to get the central site router to use RADIUS authentication for PPP. Is this possible??</P><P></P><P>Also, I want any user logging onto a PC at the remote end to be authenticated via RADIUS as well.</P><P></P><P>Any help greatly appreciated.</P> Sun, 10 Mar 2019 14:36:15 GMT mark.webster 2019-03-10T14:36:15Z LAN To LAN Radius Authentication https://community.cisco.com/t5/network-access-control/lan-to-lan-radius-authentication/m-p/220223#M435683 <P>Hi</P><P></P><P>I have the following scenario. I have a central site with a 3745 router containing a PRI card and a number of remote sites with a mixture of 1721 and 1761 routers.</P><P></P><P>I have both routers set-up to RADIUS authenticate users logging onto the routers themselves either by telnet or HTTP, and have the remote end being authenticated by RADIUS for PPP. However, I can't seem to get the central site router to use RADIUS authentication for PPP. Is this possible??</P><P></P><P>Also, I want any user logging onto a PC at the remote end to be authenticated via RADIUS as well.</P><P></P><P>Any help greatly appreciated.</P> Sun, 10 Mar 2019 14:36:15 GMT https://community.cisco.com/t5/network-access-control/lan-to-lan-radius-authentication/m-p/220223#M435683 mark.webster 2019-03-10T14:36:15Z Re: LAN To LAN Radius Authentication https://community.cisco.com/t5/network-access-control/lan-to-lan-radius-authentication/m-p/220224#M435684 <HTML><HEAD></HEAD><BODY><P>As far as I know, it should be possible to use RADIUS to authenticate PPP sessions. I would suggest you to verify your method list configurations on the routers.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca7ab.html" target="_blank">http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca7ab.html</A></P><P></P></BODY></HTML> Tue, 23 Dec 2003 16:53:28 GMT https://community.cisco.com/t5/network-access-control/lan-to-lan-radius-authentication/m-p/220224#M435684 wong34539 2003-12-23T16:53:28Z