https://community.cisco.com/t5/network-access-control/dialout-dialin-radius-attribute-required/m-p/220114#M435685 <P>Hello,</P><P>we have a cisco 3745 with a PRI card that uses a AAA server to authenticate users. This router caters for both DIALOUT users and DIALIN users. The issue we have is that we are unable to differentiate between the two types of users on the AAA server. As a result a user with a DIALOUT account is also able to DIALIN as well. Does anyone know of a RADIUS attribute that will define if a user is DIALOUT or DIALIN. Any connection from outside that attempts to use a DIALOUT account should be refused.</P><P>Thanks in advance,</P><P>Paul</P> Sun, 10 Mar 2019 14:36:12 GMT paullux 2019-03-10T14:36:12Z https://community.cisco.com/t5/network-access-control/dialout-dialin-radius-attribute-required/m-p/220114#M435685 <P>Hello,</P><P>we have a cisco 3745 with a PRI card that uses a AAA server to authenticate users. This router caters for both DIALOUT users and DIALIN users. The issue we have is that we are unable to differentiate between the two types of users on the AAA server. As a result a user with a DIALOUT account is also able to DIALIN as well. Does anyone know of a RADIUS attribute that will define if a user is DIALOUT or DIALIN. Any connection from outside that attempts to use a DIALOUT account should be refused.</P><P>Thanks in advance,</P><P>Paul</P> Sun, 10 Mar 2019 14:36:12 GMT https://community.cisco.com/t5/network-access-control/dialout-dialin-radius-attribute-required/m-p/220114#M435685 paullux 2019-03-10T14:36:12Z https://community.cisco.com/t5/network-access-control/dialout-dialin-radius-attribute-required/m-p/220115#M435686 <HTML><HEAD></HEAD><BODY><P>As far as i know, there is no RADIUS attribute for dial-in authorization. Let me know if you know of any.</P></BODY></HTML> Tue, 23 Dec 2003 16:52:50 GMT https://community.cisco.com/t5/network-access-control/dialout-dialin-radius-attribute-required/m-p/220115#M435686 2003-12-23T16:52:50Z