topic ACS 3.0 in Network Access Control

ACS 3.0

ciscobuddy — Sun, 10 Mar 2019 14:34:06 GMT

Hi All,

CAn anyone tell me wht configuration i hv to do to run cisco Secure ACS 3.0 server. please give me suggestion or give me any good link. i hv 6509,7513,12208 devices in my network.

Thanks & Regards,

Ciscobuddy

Re: ACS 3.0

aschiebe — Tue, 18 Nov 2003 11:40:36 GMT

Hi Ciscobuddy,

ACS 3.X (actually 3.2 is the latest release) is Authentication,Authorization and Accounting server that support Radius and Tacacs+ AAA Clients.

Regarding configuration - it depends what you want to achieve.

The devices you mentioned (Switch and 2 Routers) might need management and you'd like to have your administrators authenticated against ACS , given the appropriate privileges using authorization and ofcourse audited.

Usually Tacacs+ is used for this kind of functionality.

Let me know if you need more guidance or want to achieve something else.

Thanks

Ami

Re: ACS 3.0

secnas — Sat, 29 Nov 2003 12:59:34 GMT

Hi aschiebe,

could you please let me know which will be ideal for PIX firewall client & wha are the mandatory parameters we need to perform to see its up and running !!! would higly appreciate any assistance ..

Thanks

Re: ACS 3.0

aschiebe — Sun, 30 Nov 2003 12:28:13 GMT

I guess you want to manage access to the PIX firewall.

A good White paper about designing and configuring Device Management is http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/ndmse_wp.htm

HTH,

Ami