topic Re: radius-server command not available? in Network Access Control https://community.cisco.com/t5/network-access-control/radius-server-command-not-available/m-p/297142#M435791 <HTML><HEAD></HEAD><BODY><P>Radius support has been introduced in 11.3T. What version are you running on your devices?</P></BODY></HTML> Mon, 10 Nov 2003 13:30:55 GMT Harold Ritter 2003-11-10T13:30:55Z radius-server command not available? https://community.cisco.com/t5/network-access-control/radius-server-command-not-available/m-p/297141#M435741 <P>Hi,</P><P></P><P>I am trying to set up some routers &amp; switches so that users authenticate with the radius server.</P><P></P><P>However I am not able to input the radius-server command to specify the host and port etc.</P><P></P><P>I have entered the following:</P><P></P><P>aaa new-model</P><P>aaa authentication login default group radius</P><P>aaa authentication login backup local</P><P></P><P>but radius-server is just not available as a command!!</P><P></P><P>I have various IOS versions running on different routers &amp; switches (2610, 3548, 2950 etc)</P><P></P><P>The only success I have had with the command so far is with our 5509's</P><P></P><P>Can anyone help?</P><P></P><P>Is there a minimum level of IOS released to support the command - if so what is it so that I can look at upgrading.</P><P></P><P>Many thanks.</P><P></P><P>Keiron.</P> Sun, 10 Mar 2019 14:33:31 GMT https://community.cisco.com/t5/network-access-control/radius-server-command-not-available/m-p/297141#M435741 khodgson 2019-03-10T14:33:31Z Re: radius-server command not available? https://community.cisco.com/t5/network-access-control/radius-server-command-not-available/m-p/297142#M435791 <HTML><HEAD></HEAD><BODY><P>Radius support has been introduced in 11.3T. What version are you running on your devices?</P></BODY></HTML> Mon, 10 Nov 2003 13:30:55 GMT https://community.cisco.com/t5/network-access-control/radius-server-command-not-available/m-p/297142#M435791 Harold Ritter 2003-11-10T13:30:55Z