Please help me in configuring ACS

anji.reddy — Sun, 10 Mar 2019 14:26:23 GMT

Hi,

I am having problem with configuring ACS for http server authentication. How do i configure ACS/Radius

server to authenticate users to access HTTP server(IIS Server ). If Itry to access http server from outside you shiuld prompt for a username and Passowrd(Network Domain account).\

Re: Please help me in configuring ACS

yusuff — Mon, 11 Aug 2003 02:18:12 GMT

ACS cannot directly prompt a user intiating HTTP connection to your webserver. You need a NAS (Network device) in between the user and the webserver (eg PIX or router) which will Proxy the HTTP request and authenticate the user with ACS; upon success, it will patch the connection to the webserver, and on fail, tear down the connection.

Eg;

Auth-Proxy feature on a router

http://www.cisco.com/warp/public/793/ios_fw/auth6.html

http://www.cisco.com/warp/public/793/ios_fw/auth_intro.html

HTTP authentication through the PIX

http://www.cisco.com/warp/public/110/atp52.html

Regards

Yusuf

topic Please help me in configuring ACS in Network Access Control

Please help me in configuring ACS

Re: Please help me in configuring ACS