topic Database Replication between ACS 3.0 and 3.1 in Network Access Control

Database Replication between ACS 3.0 and 3.1

c-hayward — Sun, 10 Mar 2019 14:21:54 GMT

Does anyone know of any known issues when replicating an ACS version 3.0 database to a version 3.1 ACS?

Re: Database Replication between ACS 3.0 and 3.1

ywadhavk — Wed, 18 Jun 2003 14:13:59 GMT

Hi Chris,

All Cisco Secure ACSes involved in replication must run the same release of the Cisco Secure ACS software. For example, if the primary Cisco Secure ACS is running Cisco Secure ACS version 3.0, all secondary Cisco Secure ACSes should be running Cisco Secure ACS version 3.0. Because patch releases can introduce significant changes to the CiscoSecure database, we strongly recommend that Cisco Secure ACSes involved in replication use the same patch level, too.

More info on the url below;

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs31/acsuser/s.htm#549

Thanks,

Yatin

Re: Database Replication between ACS 3.0 and 3.1

mhoda — Thu, 19 Jun 2003 04:18:17 GMT

Hi,

As previous post mentioned, this will not work at all. Has to be same version and the same patch level, as when replicarion takes place, there is strict check of version info before replication takes place completely.

Regards,

Mynul