TAC+ error message

JOHN VOLTER — Sun, 10 Mar 2019 14:28:49 GMT

Hi,

I am getting this:

%TAC+: no address for get_server

for an every single command I enter into the router. What is wrong? Any ideas?

Thanks in advance!

Re: TAC+ error message

gfullage — Wed, 10 Sep 2003 00:51:43 GMT

This is probably CSCdz79320 (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCdz79320&Submit=Search) which is eventually duplicated back to CSCdx84619 (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCdx84619), you cna check the link for the fixed versions of the code.

Shouldn't have any effect really, other than AAA processes may be a bit slow. The bug seems to be seen when AAA is heavily loaded, if you're doing command authorization for every command then you may be hitting it, but other than it taking a little longer and filling up your logs it shouldn't have any other effect.

topic Re: TAC+ error message in Network Access Control

TAC+ error message

Re: TAC+ error message